NXP Semiconductors
UM10935
PN7150 NFC Controller SBC Kit User Manual
UM10935
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.5 — 10 July 2019
348015
18 of 25
5.4 Using in another system
The OM5578/PN7150S demonstration kit can be reuse in another system (different from
Raspberry Pi or BeagleBone, and not offering Arduino Compatible interface).
Indeed, the PN7150 NFC Controller Board provides all required signal on TB2 and TB3
(signals are duplicated on both connectors) connectors to interface boards.
Fig 20. PN7150 NFC Controller Board interface connectors
Table 9. PN7150 NFC Controller Board TB2 connector pinout
TB2
PN7150 signal
#1
VBAT/VDD(PAD): 3.3V supply voltage
#2
VANT: 5V optional supply voltage
#3
Not connected
#4
GND: ground
#5
IRQ: interrupt request output
#6
VEN: reset pin
#7
Not connected
#8
Not connected
TB3
TB2
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
