NXP Semiconductors
UM10935
PN7150 NFC Controller SBC Kit User Manual
UM10935
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.5 — 10 July 2019
348015
3 of 25
1. Introduction
The present document describes the OM5578/PN7150S demonstration kit, a flexible and
easy-to-use Single Board Computer (SBC) Kit for the PN7150 NFC Controller.
It enables the development of an NFC solution based on PN7150 in a Linux, Android or
Windows for IoT environment or even in system based on RTOS or without OS.
It exists in different configurations:
- OM5578/PN7150RPI to be used with Raspberry Pi platform (see [1])
- OM5578/PN7150BBB to be used with BeagleBone Interface Board (see [2])
- OM5578/PN7150ARD to be used with platforms offering Arduino compatible
interface (see [3]), like LPCXpresso (see [5]) or Kinetis Freedom (see [4]).
This document presents first an overview of the kit.
Then, it gives printed circuit boards details.
Finally, it provides information for reuse of the kit in different environments.
This kit is registered as FCC certified module (FCC ID: OWROM5578-PN7150S).
Errata
: First batch of demo kits were released with beta version of PN7150 IC. Those
can be identified looking to the PN7150 version number (see chapter §6.2 in UM10936
[7]): Manufacturer specific information in CORE_INIT_RSP is 0x88100110 for PN7150
beta release while it is 0x881001A0 for the production release.
The main limitation of the beta release resides in the missing support for the
TEST_GET_REGISTER_CMD/RSP (see description in UM10936 [7] chapter §12.4)
which may be used during the matching process (as described in AN11755 [8] chapter).
Downloaded from
Downloaded from
Downloaded from
