RDAIRPABPSI5UG , Rev. 2.0
22
Freescale Semiconductor, Inc.
Installing the Software and Setting up the Hardware
Figure 9. FreeMASTER Application Mode
Notes:
In this GUI mode during simulated airbags’ "deployment", the relevant squibs drivers are not activated. In order to deploy front
airbags, a combination of acceleration values (Front Satellites & Central Accel) above the threshold is required to simulate front
deployment.
Other deployment indicators can be found on the actual ARP Hardware. Four red color LEDs are implemented onboard in order to provide
the same information as displayed on FreeMASTER GUI. User can also take advantage of this onboard LEDs in case a real application
firmware is developed based on Freescale ARP to indicate which car airbags have been deployed.
Figure 10. On-Board and Side Airbags Red Color LEDs
