Distributor of NXP Semiconductors: Excellent Integrated System Limited
Datasheet of DEMO908JL16 - BOARD DEMO FOR MC908JL16
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
DEMO908JL16 User's Manual
Page 9
3 Software Setup
3.1 Overview
i
Note
:
before connecting the Demonstration Board to the PC, it is
recommended that you install all of the required software first (see
below), so that the appropriate USB driver will be automatically found by
Windows when you connect the Demonstration Board.
The Demonstration Board requires that both CodeWarrior Development Studio Special Edition
and SofTec Microsystems Additional Components be installed in the host PC.
i
Note: CodeWarrior Development Studio for HC(S)08 must be installed
first.
3.2 Host System Requirements
The Demonstration Board is controlled by CodeWarrior Development Studio. The following
hardware and software are required to run the CodeWarrior user interface together with the
Demonstration Board:
A 200-MHz (or higher) PC compatible system running Windows 98, Windows 2000 or
Windows XP;
128 MB of available system RAM plus 1 GB of available hard disk space;
A USB port;
CD-ROM drive for installation.
3.3 Installing CodeWarrior Development Studio
To install the CodeWarrior Development Studio Special Edition, insert the CodeWarrior CD-
ROM into your computer’s CD-ROM drive. A startup window will automatically appear. Follow
the on-screen instructions.
12 / 33
12 / 33
