5
www.nxp.com
SOFTWARE INSTALLATION INSTRUCTIONS
In this Quick Start Guide, you will learn how to set up the TWR-K60D100M board and
run the included demonstrated software. For more detailed information, review the
user manual at www.nxp.com/TWR-K60D100M.
1
Configure the
Hardware
Connect one end of the USB cable to
the PC and the other end to the Power/
OSJTAG mini-B connector on the TWR-
K60D100M module. Allow the PC to
automatically configure the USB drivers if
needed.
2
Run the Quick
Start Demo
The LEDs on the board, D7 and D11, will
gradually illuminate as the board is tilted.
When rotated around the accelerometer’s
x-axis the Blue LED (D11) will illuminate.
Similarly, the red LED (D7) will gradually
illuminate as rotated around the y-axis.
3
Download
Software
Download installation software
and documentation
at
www.nxp.com/TWR-K60D100M
.
