UM10563
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2012. All rights reserved.
User manual
Rev. 1 — 9 August 2012
6 of 19
NXP Semiconductors
UM10563
Gaming suitcase demo system
3.6 Setup
This section describes how to set up the Gaming suitcase demo.
3.6.1 PCU9669 demo setup
3.6.1.1
Jumper settings
Default jumper and switch positions for the PCU9669 demo.
Table 1.
Jumper settings
Jumper
Position
Description
Motherboard
JP1
open (default)
reserved for microcontroller programming (CBUS1)
1-2
reserved
JP2
1-2
reserved for microcontroller programming (CPU Rst)
open (default)
reserved
JP3
open (default)
JTAG TRCK LPC2214 not returned
1-2
JTAG TRCK LPC2214 returned
JP5
open (default)
JTAG LPC2214 IDC +3.3 V power not connected
1-2
JTAG 2214 IDC +3.3 V power connected
JP11
open (default)
JTAG TCK PCA966x not returned
1-2
JTAG TCK 996x returned (pin 9 to 11)
JP12
open (default)
JTAG 996x IDC +3.3 V not connected
1-2
JTAG 996x IDC +3.3 V power connected
JP13
open
CH0 24 V power not connected
1-2 (default)
CH0 24V power connected
JP14
open (default)
CH0 test mode SCL0 pull-down disabled
1-2
CH0 test mode SCL0 pull-down enabled
JP15
open (default)
CH0 test mode SDA0 pull-down disabled
1-2
CH0 test mode SDA0 pull-down enabled
JP16
1-2 (default)
CH1 24 V power enabled
open
CH1 24 V power disabled
JP17
open (default)
CH1 test mode SCL1 pull-down disabled
1-2
CH1 test mode SCL1 pull-down enabled
JP18
open (default)
CH1 test mode SDA1 pull-down disabled
1-2
CH1 test mode SDA1 pull-down enabled
JP19
1-2 (default)
CH2 24 V power enabled
open
CH2 24 V power disabled
JP20
open (default)
CH2 test mode SCL2 pull-down disabled
1-2
CH2 test mode SCL2 pull-down enabled
JP21
open (default)
CH2 test mode SDA2 pull-down disabled
1-2
CH2 test mode SDA2 pull-down enabled
JP4
1-2
TXD - 2214 enabled
open (default)
TXD - 2214 disabled
