UM11057
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2017. All rights reserved.
User Manual
Rev. 1.0 — 9 June 2017
3 of 14
NXP Semiconductors
UM11057
User Manual
1. Introduction
The LPCXpresso-MAX family of boards provides a powerful and flexible development
system for NXP's low end Cortex-M0+ MCUs. They can be used with a range of
development tools, including the MCUXpresso IDE toolchain. The LPCXpresso845MAX
board is developed by NXP to enable evaluation of and prototyping with the LPC84x
family of MCUs.
Figure 1
shows the LPCXpresso845MAX Board.
The LPCXpresso845MAX board includes the following features:
•
Compatible with MCUXpresso IDE and other popular toolchains (incl. IAR and Keil).
•
On-board CMSIS-DAP (debug probe) with VCOM port, based on LPC11U35 MCU.
•
Debug connector to allow debug of target MCU using an external probe.
•
Red, Green and Blue User LEDs.
•
Target ISP and User/Wake buttons.
•
Target Reset button.
•
LPCXpresso expansion connector.
•
DAC output via speaker driver and speaker.
•
Arduino connectors compatible with the “Arduino UNO” platform.
•
Pmod® compatible expansion header.
•
Prototyping area.
Fig 1.
LPCXpresso845MAXBoard
