17
Problem
Possible causes
What to do
The display on the front
panel does not light up.
No sound or picture, but the
front panel shows red light.
Main cable is not connected.
The
is in standby mode.
receiver
Check that the main cable is plugged into
the power socket.
Press the standby button on the remote
control unit
No sound and picture.
The connection between the cable and
the set top box may be faulty or there is
no signal.
Check the connection between the set top
box and the cable.
Bad picture / blocking
error.
Cable signal is too weak.
Adjust the strength of sig
na
l.
The RCU is not working.
Battery exhausted.
Change the batteries.
RCU is incorrectly aimed.
Aim RCU at the
, or check that
nothing blocks the front panel.
receiver
Note: If the problem still persists after you have tried the actions suggested above,
please contact your dealer or service provider.
