31
X
* Press the Enter key to save changes.
4.5.2.10 Turn Off the Utility Input breaker.
4.5.2.11 Your setting changes are now complete.
4.5.2.12 Turn UPS off
(1)
Line mode(AC input available) : Press Off key
and hold until
twice beeps heard, UPS output will shut off. UPS will stay in standby
mode, fan(s) keep spinning and battery will be remained recharging if
AC input still available after output is off, otherwise it will be shutdown
completely.
(2)
Backup mode (AC input not available): Press Off key
and hold
until twice beeps heard, UPS output will shut off. 10 seconds later,
fan stop spinning and UPS shutdown completely.
4.5.2.13 Self-Test (Line mode only)
The purpose of the self-test function is to ensure the backup capability of the
battery pack, and it can only be applied when UPS is working ac line mode
(AC input available) and battery pack is properly recharged.
Press
key to change the LCD display to below figure.
