NZR – Ihr Partner für Energiemessung
Technische Änderung
en v
orbehalten.
-
Technical details subjec
t t
o char
ge
. - Modifica
tion
techniques r
éser
vées.
19
How to set the electricity price and the CO2 value on your SEM 16+ / SEM 16+ USB
The electricity price is set at the factory to 0.20 costs per kWh and does not refer to a
specific currency. To set the rate to the electricity price of your power supply company,
you can change the default value in the SEM16+ as follows:
1. Press the START/STOP and SET buttons simultaneously until “0.200 costs / kWh”
appears in the display.
2. Press the START/STOP button one or more times to increase the value of the digit to
the far right (3rd decimal place). Press SET to jump one digit to the left (2nd decimal
place). Now you can increase the value of this digit by pressing the START/STOP
button one or more times. Proceed in the same manner for the remaining digits.
3. When the desired amount is shown in the display, again press the SET and FUNCTION
buttons simultaneously. This value is now used by the SEM 16+ / SEM 16+ USB for
calculating your energy costs.
4. Then you switch to the item where you can set the CO2 value. Following the same
procedure as described in number 2, you can set this value by pressing the START/
STOP and SET buttons.
5. When the desired value is shown in the display, again press the SET and FUNCTION
buttons simultaneously until the display switches back to the starting point.
The electricity price and CO2 emissions factor you have saved in the unit are retained
even when the SEM 16+ / SEM 16+ USB is unplugged from the power supply. The next
time you operate the unit the programmed values will be used again.
You can change the electricity price and the CO2 value at any time.
!!!
Note: The ‘costs’ symbol is the currency-neutral symbol for the currency used.
In Germany and many European countries it represents ‘€’
(e.g.: 0.150 costs/kWh = 0.15€/kWh).
!!!
Tip:Your power supply company can provide you with the applicable price per kWh.
!!!
Tip:Your power supply company can provide you with the applicable emissions
factors for the CO2 calculation.
