The case comes with three 120mm blue color LED fans ( rear,
frontal, and side). In the case where you will need to replace or
change the fans, please follow the instructions below.
Front Fan Installation
1. Begin the installation process by removing the front panel.
Complete this step by firmly pulling the opening at the
bottom of the front panel.
2. Detach the fan cage from the front panel, make sure the
power cables have been disconnected.
3. Detach the fan from the cage itself and replace it with the
new fan.
4. Secure the fan back into it’s place to complete this process.
Installing PCI/AGP Cards
1. Your Nemesis comes with a screwless installation design for
securing your peripherals during movement.
2. Begin by placing your peripheral in place.
3. After you have installed your card, secure your card by
pushing the lock down and securing it. To ensure stability,
please use the secure the peripheral with screws provided
and then proceed to use the lock.
Fastener Figure. Push down here to lock the fastener
NZXT. 9
