background image

2

Remember  that  your  engine  is  not  a  "toy",  but  a  highly  efficient  internal-
combustion  machine  whose  power  is  capable  of  harming  you,  or  others,  if  it  is 
misused.
As owner, you, alone, are responsible for the safe operation of your engine, so act 
with discretion and care at all times.
If  at  some  future  date,  your  O.S.  engine  is  acquired  by  another  person,  we  would 
respectfully request that these instructions are also passed on to its new owner.

SAFETY INSTRUCTIONS AND WARNINGS ABOUT YOUR O.S. ENGINE

The  advice  which  follows  is  grouped  under  two  headings  according  to  the 
degree of damage or danger which might arise through misuse or neglect.

WARNINGS

NOTES

These  cover  events  which 
might  involve  serious  (in 
extreme  circumstances,  even 
fatal) injury.

These  cover  the  many  other 
possibilities,  generally  less  obvious 
sources of danger, but which, under 
certain  circumstances,  may  also 
cause damage or injury.

3

WARNINGS

Never  touch,  or  allow  any 
object  to  come  into  contact 
with, the rotating parts.

Model engine fuel is poison-
ous. Do not allow it to come 
into contact with the eyes or 
mouth.  Always  store  it  in  a 
clearly marked container and 
out of the reach of children.

Model  engine  fuel  is  also 
highly  flammable.  Keep  it 
away  from  open  flame, 
excessive  heat,  sources  of 
sparks, or anything else which 
might ignite it. Do not smoke 
or allow anyone else to smoke, 
near to it.

Model 

engines 

generate 

considerable  heat.  Do  not 
touch  any  part  of  your 
engine  until  it  has  cooled. 
Contact  with  the  muffler 
(silencer),  cylinder  head  or 
exhaust  header  pipe,  in 
particular,  may  result  in  a 
serious burn.

Never  operate  your  engine  in  an  en-
closed space. Model engines, like auto-
mobile engines, exhaust deadly carbon-
monoxide.  Run  your  engine  only  in  an 
open area.

Summary of Contents for MAX-91SX-HRING C Spec PS VIPER






















Reviews: