9
3 MENU
3.1 Main menu
3.1.1 Navigation
In this mode you can
recall your planned route (see
8.1 Selecting and following a route
page 14)
start back-tracking (
see 5 Backtrack
– home tracking function
page 12)
choose and head for a POI (see
Saving and recalling of landmarks
page 12)
3.1.2 GPS Information
Shows your current position.
3.1.3 Deleting data
Enables you to delete data (see
7 Deleting Data
page 12).
3.1.4 Setting
Contains all kinds of set menus.
3.2 Set menus
3.2.1 Power-mode – Set up background lighting
Backlight
Here you can preset how long the background lightning will be switched on when pushing a button.
Alternatively the background lightning can be switched off entirely.
Auto suspend
Here you can preset after which time period of non-use the device will shut down. Alternatively you
can set the device to stay permanently powered.
3.2.2 Time zone – Set up time and date
Once the NAVI2move has found a GPS satellite for the first time, the time and date of the GPS
satellite will be adopted automatically. Nevertheless the time can vary from the real time, depending
on the time zone you are in. To adjust the time for your current region, enter the time offset under
menu item
„
Manual
“.
For example: Displayed time 12:00 - actual time 14:00. Choose UTC +02 for adjusting the time to
14:00.
Settings for Germany :
Daylight saving time UTC +02 and winter time UTC +01
Automatic: The time which is transferred by the current GPS-satellite is used for time display.
Manual: Here you can adapt the GPS time to your regional time zone.