9. Use the 8 perimeter
holes on the spider
(circled in yellow) to
fasten the base to
the table top.
10. Using the screwdriver or
drill driver and (8) 3/4”
#10 screws, fasten the
base to the table top.
12. Assembly is complete. Enjoy
your Oak Street Manufacturing
black stamped steel table base!
255 Welter Drive
Monticello, IA 52310
P: 877.465.4344
F: 877.465.4042
www.oakstreetmfg.com
Thank you for your business!
Thank you for your business!
8. Measure from the table
end. The base can either
be 12” from the edge of
spider to table edge, or
12” on center from table
edge - depending on the
need.
Then measure from
the spider’s edge to
the sides of the table to
ensure it’s centered.
11. Repeat steps 1-9 with the
other ‘t’ base on the opposite
end of the table.
