14
EN
Instruction Guide
SCAN SETTING
This is a setting to choose between letting the radio scan for all stations, or just for
stations with a strong signal.
1. Press the MENU button, then press or to select “Scan setting”.
Press the ENTER button to confirm menu choice.
2. Press the or buttons to select “All
S
tations” or “Strong
S
tations only”.
Press the ENTER button to confirm setting choice.
AUDIO SETTING
This unit will automatically switch between stereo and mono mode, but you
can override this and choose manually.
This can be helpful when having poor signal reception.
1. Press the MENU button, then press the or buttons to select
“Audio setting”. Press ENTER to confirm.
2. Press the or
buttons to select “Stereo
A
llowed” or “Forced
M
ono”
and then press ENTER to confirm
.
PRESET STATIONS
You can store up to 30 of your favorite stations. This will enable you to access
your favorite stations more quickly and easily.
1. To store a preset, you must be listening to the station that you want to save.
Press and hold MEMORY. The display will
show “Preset Store < 1:(Empty)>”.
2. Press the or buttons to select your desired preset station number and
press the ENTER button to confirm.
3. The station will be stored, the display will show “Preset #Stored”.
RECALLING A STORED STATION
1.
Once you have saved a station to one of the preset buttons, you can
recall it by pressing the MEMORY button.
2.
Press the or Button until your desired stations show on the
display; Then press the ENTER button confirm
.
You also can recall the pre-set channels directly by pressing the CH+ or CH-
Button on remote control repeatedly.
