Instruction Guide
7
EN
Instruction Guide
TIMER
You can set a time when the device will switch on and off automatically
every day.
1. Switch the device to standby mode.
2. Press and hold the TIMER button on remote control until “ON TIMER”
is shown on the display, the hour digits flash.
3. Use the or button to set the required switch-on time. Select
the hours first and confirm by pressing ENTER.
4. Then use the or button to set the minutes and confirm again by
pressing ENTER.
5. ”OFF TIMER” appears on the display, the hour digits flash.
6. Use the or button to set the required switch-off time. Select the
hours first and confirm by pressing ENTER.
7. Use the or button to set the minutes and confirm again by
pressing the ENTER button.
8. Then use the or button to select the mode to be used when
device is switched on: DAB, FM, CD, USB, BUZZER
(alarm tone) and press ENTER to confirm.
9. Use the or button to set the required volume and press ENTER
to confirm.
Timer setting is now complete. When done successfully, the symbol
is shown on the display. To switch off the timer, proceed as follows:
1. In standby mode, briefly press the TIMER button. The symbol
on the display turns off.
2. You can activate the timer with the previously configured settings at
any time by pressing TIMER again.
