19
EN
Parent Control
The STB is shipped with a default personal identification number (PIN). The default
PIN is
000000
. The PIN is required if you have enabled the parental lock. To enable
Parent Control:
1.
Press MENU (
Ref.10
) on the remote control. The main menu will appear.
2.
Scroll across until ‘System’ is highlighted.
3.
Scroll down to ‘Parental Guidance’. Select this option, and when prompted
input the password as
000000
, unless you have previously changed the PIN
to a different number.
4.
From here, you can change the age limit for programs. Once you have
selected an age limit, watching any channel which is marked beyond this will
require the PIN.
Automatic Power On/Off and Sleep
Follow this procedure to set the STB to switch on and off at specified times.
1.
Press MENU (
Ref.10
) on the remote control. The main menu will appear.
2.
Scroll across to select ‘Time’. Select Power On/Off. From here, you can set the
STB to switch on and switch off at specified times. To do this, select ‘Enable’
or ‘Disable’ for ‘Power On’ and ‘Power Off’ according to your preference.
Select your preferred Power On and/or Power Off time(s) by highlighting the
time and typing in your selected time using the number keypad (
Ref.20
).
You can also set the STB to sleep after a certain amount of time (between 1 and 12
hours) by selecting ‘Sleep’ under ‘Time’.
PARENT CONTROLS & AUTO-POWER ON
Summary of Contents for SB-200
Page 1: ...SB 200 U S E R M A N U A L...
Page 26: ......
Page 27: ......
Page 28: ...WWW OAKCASTLE CO UK...
