Introduction
This is the User Manual for the Classic VCA 3U module from Oakley Sound. This document
contains an overview of the operation of the unit and the calibration procedure
For the Builder's Guide, which contains a basic introduction to the board, a full parts list for
the components needed to populate the board or boards, and a list of the various
interconnections, please visit the main project webpage at:
http://www.oakleysound.com/vinvca.htm
For general information regarding where to get parts and suggested part numbers please see
our useful Parts Guide at the project webpage or http://www.oakleysound.com/parts.pdf.
For general information on how to build our modules, including circuit board population,
mounting front panel components and making up board interconnects please see our generic
Construction Guide at the project webpage or http://www.oakleysound.com/construct.pdf.
The prototype Classic VCA module using a 10HP wide Scheaffer panel. Note that on this module the
sockets are on the right of the pots. The Krisp1 manufactured version has the pots to the left and fitted
with an 8HP wide panel. The functionality is the same however.
2
