Parts List
For general information regarding where to get parts and suggested part numbers please see
our useful Parts Guide at the project webpage or http://www.oakleysound.com/parts.pdf.
The components are grouped into values, the order of the component names is of no particular
consequence.
A quick note on European part descriptions:
For resistors: R is shorthand for ohm. K is shorthand for kilo-ohm. M is shorthand for mega-
ohm
For capacitors: 1uF = 1,000nF = 1,000,000pF. Sometimes the F is not included on the circuit
diagram to indicate a capacitor's value, ie. 100n = 100nF.
To prevent loss of the small ‘.’as the decimal point, a convention of inserting the unit in its
place is used. eg. 4R7 is a 4.7 ohm, 4K7 is a 4700 ohm resistor, 4n7 is a 4.7 nF capacitor.
Resistors
1% 0.25W metal film are recommended
240R
R2, R3
2K4
R1, R4
4K7
R5, R7
6K8
R6
Capacitors
100nF, 63V polyester film
C3, C4, C10, C11
10uF, 35V electrolytic
C5, C6, C9, C12
22uF, 35V electrolytic
C13
1800uF, 35V or 50V electrolytic
C1, C2, C7, C8
Note: C1, C2, C7, and C8 should be 105 degree Celsius radial types and have standard wire
ended leads. The lead spacing is 7.5mm. For example, Panasonic type EEUFC1V182 or
EPCOS B41888-C6188-M, but any decent 105 degree part that will fit on the board will do.
50V parts will have a longer lifetime than 35V parts but will be physically slightly larger.
9
