Introduction
This is the Builder's Guide for the Stereo Ensemble Module SRE330 from Oakley Sound. This
document contains a basic introduction to the three circuit boards used to make the SRE330 rack
module and a full parts list for all the components needed to populate the board or boards.
For the User Manual, which contains an overview of the unit, the operation of the module and the
calibration procedure, please visit the main project webpage at:
http://www.oakleysound.com/sre330.htm
For general information regarding where to get parts and suggested part numbers please see our
useful Parts Guide at the project webpage or http://www.oakleysound.com/parts.pdf.
For general information on how to build our modules, including circuit board population, mounting
front panel components and making up board interconnects please see our generic Construction
Guide at the project webpage or http://www.oakleysound.com/construct.pdf.
The first prototype unit built into a Bryant Broadcast 1U 250mm deep 19” rack enclosure with the Schaeffer front
panel attached. This one used an earlier issue 1 RPSU power module. Issue 2 RPSU boards are green and use a
five way 0.156” connector to take power onto the SRE330 main board.
