4
5
OAKLEY THUMP
™
CONTROLS
TURN OAKLEY THUMP ON
PAUSE A SONG / RESUME PLAYING
TURN OAKLEY THUMP OFF
INCREASE VOLUME LEVEL
DECREASE VOLUME LEVEL
SKIP TO NEXT SONG
FAST FORWARD WITHIN A SONG
PLAY PREVIOUS SONG
REWIND WITHIN A SONG
RANDOM / SHUFFLE
PLAYBACK ORDER
RESET OAKLEY THUMP
(FOR TROUBLESHOOTING)
EQ SETTINGS
Press and hold the
Play / Pause
button until the power-up tone is heard
(OAKLEY THUMP will turn itself on and begin playing the first song)
Press the
Play / Pause
button for less than one second
Press and hold the
Play / Pause
button until the power-down tone
is heard (OAKLEY THUMP will turn itself off after three minutes if
left in Pause mode)
Press the
Increase Volume
button
Press the
Decrease Volume
button
Press the
Next Song / Fast Forward
button
Press and hold the
Next Song / Fast Forward
button
Press the
Previous Song / Rewind
button
Press and hold the
Previous Song / Rewind
button
While pressing and holding the
Next Song / Fast Forward
button,
immediately press the
Previous Song / Rewind
button once.
While pressing and holding the
Play / Pause
button, press the
Previous Song / Rewind
button once
Press the
Increase Volume
button and the
Decrease Volume
button at the same time
Note: See the OAKLEY THUMP manual for important instructions on disconnecting OAKLEY THUMP from your computer.
INDICATOR TONES / INDICATOR LIGHT
INDICATOR TONES
• When the
Play / Pause
button is first pressed to start listening to music, a power-up tone
is heard.
• When the
Play / Pause
button is pressed and held for three seconds, OAKLEY THUMP turns
off and a power-down tone is heard. (OAKLEY THUMP will automatically power down in three
minutes after the final song is played, or if left in Pause mode.)
• When the battery is running low (less than 30%), a low-battery tone is heard. The tone is
heard during initial startup and while music is playing.
INDICATOR LIGHT
When connected to AC or computer:
• The small indicator light on the frame blinks slowly to indicate the link is okay.
• When the battery is charged, the light stops blinking and remains on to indicate a full battery.
• When files are transferred to OAKLEY THUMP, the light blinks rapidly to indicate data is
being received.
When disconnected from AC or computer:
• When the battery has less than 30% power remaining, the light blinks to indicate a low battery.
Quick Start_INT'L 3/8/05 5:20 PM Page 4
Summary of Contents for THUMP
Page 1: ...Quick Start_Universal_cvr 3 8 05 5 14 PM Page 2...
Page 2: ......