DIRECTIONS FOR USE
INTEGRATED HEATED TOP (OPTION)
Integrated heat level indicator
USING THE INTEGRATED HEATED TOP:
The table comes with the option for a fully integrated dual zone heated top pad. Simply press the heating
indicator(s) located on the right side rail of the table to the desired heat level. The heat can reach up to
40°C (105°F).
Low
Medium
High
ZONE 1
ZONE 2
Zone 1 controls the upper half of the pad, while Zone 2 controls the lower half of the pad. The Zone 1 con-
troller is on the right side of the table. Zone 2 controller is on the left side of the table. Press both buttons
to turn on both zones and heat the entire top.
BLINKING LIGHTS
If one or both controllers’ heat level indicator lights are blinking, the heating elements are not con-
nected properly and/or damaged. Unplug the table and locate the control box(es) on the underside of
the table top. Disconnect the heating element connectors from the control box and reconnect. Plug
the power cord back into the wall outlet. Call Customer Service at 717.235.6807 if problem continues.
20
