DIRECTIONS FOR USE
QUICKLOCK FACE REST: (ACCESSORY OPTION)
Double articulating action provides nearly limitless positioning options with
the QuickLock Face Rest. The adjustable pad takes pressure off sensitive
facial areas while providing superb support. The QuickLock Face Rest
can be used in both prone and supine positioning and folds out of the way
when not in use. Adjustments are made easily by loosening the cam locks,
adjusting for height and angle and then locking locks into that position.
The table has a bracket at the head of the table for a variety of uses.
3”
•
QuickLock Face Rest Weight Limit - 25 lbs (11.3 kg)
•
Do not put excessive weight or pressure on the Face Rest.
•
Excessive pressure can cause premature failure of the Face Rest.
CAUTION
ATTACHING QUICKLOCK FACE REST:
When attaching the QuickLock Face Rest, slide the frame dowels into the bracket until bullet catches are
snapped into place.
To remove the QuickLock Face Rest, gently pull the headrest by the dowels until it comes free. Set it
safely aside or store it inside the under-table cabinet until needed.
To use the face rest with your clients supine,
rotate the face rest pad so that the thick part of
the pad supports your client’s cervical region.
Adjusting the height and angle of the face rest
gives your clients perfectly comfortable support.
The face pad is flexible so that you can bring
the open ends together or spread them apart
to achieve the most comfortable support for
any size face. To avoid your client’s chin
from hitting the spacebar, make sure the pad
is narrow enough to support their whole face.
For appropriate cervical flexion, use the cam locks
to adjust the downward angle of the face rest,
making sure that the surface of the face rest pad at
the chin is not lower than the surface of the table.
TIPS FOR GREAT POSITIONING USING THE QUICKLOCK FACE REST:
Pull by dowels
Pull by dowels
To remove
21
