SYMBOL IDENTIFICATION
• How to Care for Your Upholstery
SYMBOL
IDENTIFICATION
9
DIRECTIONS FOR USE
DIRECTIONS FOR USE
Double articulating action provides nearly limitless positioning options
with the QuickLock
™
Face Rest.The adjustable pad takes pressure off
sensitive facial areas while providing superb support. The QuickLock
™
Face Rest can be used in both prone and supine positioning and folds
out of the way when not in use. Adjustments are made easily by loosening
the cam locks, adjusting for height and angle and then locking the cam
locks into that position. The table has webbing loops at the head of the
table for a variety of uses and outlets at the other end that work as well
for additional procedures.
Attaching the QuickLock
™
Face Rest / Head End Webbing:
When attaching the QuickLock
™
Face Rest, just slide the frame dowels
into the webbing loops, being sure to keep the 1st cam lock within 3” of the
table to ensure a stable connection. The recommended length of dowel
bracing against the backrest should be at least 2 inches.
To remove the QuickLock
™
Face Rest, just pull the frame from the webbing
loops until it comes free. Set it safely aside or store it inside the under-
table cabinet until needed.
Do Not
extend the dowels of
the Face Rest further than 3”
from the table edge to ensure
a stable connection.
* U.S. Patent #5,177,823
CAUTION
CAUTION
Do not put excessive weight
or pressure on the face rest.
Excessive pressure can cause
premature failure of the
QuickLock
™
Face Rest.
QuickLock
™
Face Rest
Important Safety Note: Maximum
Distance from edge of table = 3”
3”
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injury to both operator
and client.
QuickLock
™
FACE REST:
• Accessory
Option:
QuickLock
™
Face
Rest
2”
IMPORTANT
IMPORTANT
