6
The tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for
the table. (see Grounding below)
Arrange the power cord and control cords so that they will not create a tripping hazard.
Be sure access to the plug is not blocked for disconnecting the table from power.
Grounding for 120 Volt products:
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks
like the plug shown below. See Grounding Methods - US 120V Example. Make sure that the
product is connected to an outlet having the same configuration as the plug. No adapter
should be used with this product.
Grounding for 230 Volt products:
This product is rated for less than 15 amperes and is for use on a circuit having a nominal
rating of 230 volts and is factory-equipped with specific electric plug to permit connec-
tion to a proper circuit. Make sure that the product is connected to an outlet having the
same configuration as the plug. No adapter should be used.
WARNING
1. Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in doubt as
to whether the product is properly grounded.
2. Do not modify the plug provided with the product - if it will not fit the outlet; have a
proper outlet installed by a qualified electrician.
Correct Implementation
Incorrect Implementation
Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only.
DANGER
INSTALLATION
GROUNDING
Grounding Methods - US 120V Example
