15
CLEANING & DISINFECTION / INSPECTIONS / WARRANTY
CLEANING PROCESS
To reduce the risk of electric shock:
- Always unplug this furnishing form the electrical outlet before cleaning.
DANGER
Follow the cleaners/disinfectant manufacturers’ directions for use. Please note that cleaning and disinfecting an OAKWORKS
®
table
is a two part process. First it must be cleaned of any visible soil, then it can be disinfected. The table should be cleaned as soon as
possible after use. Please follow these procedures for best results:
1. Using a fresh wipe or wipes, clean any visible soil off of the table, working from the top to the bottom of the table.
2. Throw the used wipe(s) away.
3. Using a fresh wipe or wipes, thoroughly wipe all surfaces of the tabletop and any high-contact areas such as handles, hand-
sets, etc., making sure they remain wet for the disinfectant manufacturer’s recommended contact time.
4. Throw the used wipe(s) away and allow the table to dry.
INSPECTIONS
RECOMMENDED REGULAR INSPECTIONS (monthly or local standard)
•
Check for damage to the power, hand control(s) and foot control(s) on all cables.
•
Visually inspect components for obvious damage that could cause problems during operation.
RECOMMENDED PERIODIC INSPECTIONS (yearly or local standard)
•
Check for damage to the power, hands control and foot control cables and all visible wiring.
• Visually inspect components for obvious damage that could cause problems during operation.
• Check all mechanical functions using the hand control. Repeat using the foot control. Check for abnormal noises.
• Check that all fasteners are present and fastened securely.
• Check table grounding.
• Clean unusual buildup of dirt on the table and/or parts of the table not normally cleaned on a regular basis.
• Check for tears or cracks in the upholstery.
WARRANTY
View complete warranty details at www.oakworks.com
