PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
1
PRODUCT USE DESCRIPTION
The Oakworks® Fluoroscopy table with Trendelenburg feature is a radiographic table intended for use with
mobile or compact stationary C-arm Fluoroscopy Systems where the x-ray generator is located below the table
top. It is ideally suited for pain management imaging and therapeutic procedures. It is suitable to use for diagnos-
tic x-ray imaging and imaging during therapeutic procedures such as spinal injections, vertebroplasty procedures
and other pain management procedures.
It is intended to be operated by a healthcare professional in a medical environment. No special training is required
but a review of the following Safety Instructions is important for the safety of the operator and patient. The
healthcare professional should read and understand this entire manual before use with a patient.
Contraindications
•
The Oakworks
®
Fluoroscopy Table should not be used with Fluoroscopy systems having intensifier screens
or film cassettes larger than 12 inches (30 cm) when an oblique angle of view is being used.
•
The table is not designed for and should not be used with Magnetic Resonance Imaging procedures.
•
Although the table accommodates a number of procedures, it is not intended to serve as a surgical procedure
table.
SYMBOL IDENTIFICATION
This symbol, when used in this manual and on product labels, represents a caution warning. Be sure to
read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an electrical shock hazard. Be
sure to observe and comply with all warnings.
This symbol, when used in this manual and on product labels, indicates the potential of exposure to harmful
x-rays. Be sure to read and comply with all warnings.
This symbol, when used in this manual and on product labels, indicates that the table and components
are a Type B Applied Part pursuant to IEC 60601-1: 2005.
This symbol, when used in this manual or on product labels, indicates a Protective Earth (Ground)
Terminal.
This symbol, when used in this manual or on product labels, indicates the date of manufacture of the
device.
This symbol, when used in this manual or on product labels, indicates alternating current (AC).
This symbol, when used in this manual or on product labels, indicates direct current (DC).
This symbol is used to indicate that the operator should consult the user manual.
~
----
