9
DIRECTIONS FOR USE
• Drape & Hot Water Bag
• QuickLock™ Face Rest
DIRECTIONS FOR USE
DIRECTIONS FOR USE
Snap the drape to the table using the eight (8) snaps located under the
teak rail of the top of table.
Note: seamed edge of drape is to face towards head end of the table.
Standing at the head of the table, grab two (2) corners of the bag and
pull to slide the bag under the drape.
DRAPE & HOT WATER BAG
QuickLock
™
Face Rest
using Optional Lift Plate
Important Safety Note: Maximum
Distance from edge of table = 3"
QuickLock
™
FACE REST:
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injury to both operator
and client.
NOTE:
Seamed edge of drape is
placed at the head end
of the table
• Drape & Hot
Water Bag
• Accessory Option:
QuickLock
™
Face Rest
* U.S. Patent #5,177,823
CAUTION
Do not put excessive weight
or pressure on the face rest.
Excessive pressure can cause
premature failure of the
QuickLock
™
Face Rest.
Lift Plate
IMPORTANT
IMPORTANT
Double articulating action provides nearly limitless positioning options
with the QuickLock
™
Face Rest.The adjustable pad takes pressure off
sensitive facial areas while providing superb support. The QuickLock
™
Face Rest can be used in both prone and supine positioning and folds
out of the way when not in use. Adjustments are made easily by loosening
the cam locks, adjusting for height and angle and then locking the cam
locks into that position. The
Marina
™
has outlets at the head of the table
for a variety of uses and outlets at the other end that work as well for
additional procedures. An optional Lift Plate can be used for even more
adjustability; call Customer Service for more information.
3"
8
DIRECTIONS FOR USE
•
Marina
™
Battery Use
DIRECTIONS FOR USE
DIRECTIONS FOR USE
Pull the battery out and place it firmly onto the charger bracket. Plug in
the charger to begin charging the battery.
To place the battery back into table after charging:
Push the red ‘STOP’ button to turn the control box off. Open the Velcro
®
hook and loop fastener flap at the end of the battery unit. Slide the bat-
tery into the clear vinyl sling, pushing it into the metal bracket above until
it snaps into place. Turn the red ‘STOP’ button clockwise to turn the
control box back on.
BATTERY USE
(cont)
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injury to both operator
and client.
Be sure the
battery is
snapped
securely in
place before
turning the
unit back on.
• Battery
