page 2
1. You will need to lift or lower the arm rest until your client’s
forearms rest comfortably on the pad and his/her shoulders
are relaxed.
2. To lower the arm rest, lift the buckle and extend the strap.
(photo 8)
3. To raise the arm rest, pull on the strap. (photo 9)
ARM REST ADJUSTMENTS
• Note: The arm rest is designed to support the weight of your
client’s forearms. Do not allow your clients to push against the
arm rest to lift themselves out of the chair. The arm rest will
not support your client’s full weight.
1. Unlock Velcro from around the inserted bar and remove bar from
locking arm. (photo 10 & 11)
2. Raise pivot section and push up on arm rest. (photo 12). Tighten
Arm rest strap.
3. Remove face rest crescent, Loosen the face rest knobs &
CamLocks, raise the face rest & fold forward over chest pad.
Replace crescent. Tighten knobs and CamLocks. (photo 13)
FOLDING YOUR MASSAGE CHAIR
1. To carry your chair with the
carry strap, First, fold the chair
as instructed above.
Attach the carry strap to the
D-Rings on the frame of the
chair. (photo 14)
2. Lift the chair by
holding onto one of
the main frame tubes
& place the strap
on your shoulder. (photo 15)
CARRYING YOUR CHAIR WITH STRAP
8) Lengthen Strap
9) Tighten Strap
12) Fold up the chair
11) Remove Bar
10) Unwrap Velcro
14) D-Ring
Face rest
CamLocks
Arm rest
Arm rest
buckle & strap
Horizontal bar
& locking arm
Chest
Pad
Seat
Knee
Pads
Face rest
knobs
Personal item
storage shelf
15) Carry position
13) Fold head rest
CAUTION
MAXIMUM WORKING LOAD RATING
300 LBS. (136 KG)
