Instructions for Attaching the Stationary Lift Plate*: (Stationary Tables Only)
For Stationary Table owners, Oakworks® offers a Lift Plate that attaches
directly to your
QuickLock™
Face Rest to add 1” of height to your
Face Rest pad and add to the comfort of your clients.
1) Attach the center tab to the center velcro strip on the
QuickLock™
Face Rest. (Fig. 8) Then attach the side tabs to the velcro strips on the
side arms of the Face rest as shown. (Fig. 9)
Fig. 8
Fig. 9
* U.S.Patent # 5,177,823
Instructions for Attaching the Arm Rest Shelf to the QuickLock™ Face Rest•:
On Wooden Portable Tables:
1) Snap the two ends of the quick release buckle together around the
cross bar of the QuickLock™ Face Rest. (Fig. 10)
2) To adjust your Arm Rest Shelf, pull on the strap to raise the shelf or
loosen the strap to lower it. When completed, your Arm Rest Shelf will
be attached as shown. (Fig. 11)
On Metal Portable Tables:
1) Unfold support arms. (Fig. 12)
2) Insert hooked ends of the Arm Rest Shelf support arms into any of
the holes on the legs of the table. (Fig. 13) Higher holes are better
for clients with shorter arms.
3) Snap the two ends of the quick release buckle together around the
cross bar of the QuickLock™ Face Rest. (Fig.14)
4) To adjust your Arm Rest Shelf, pull on the strap to raise the the shelf
or loosen the strap to lower the it. When completed, you Arm Rest
Shelf will be attached as shown. (Fig. 15)
Maximum
Weight Capacity for
QuickLock™ Face Rest:
25 lbs
Fig.10
Fig. 13
Fig. 15
Fig. 11
Fig. 14
Strap
Fig. 12
CAUTION:
DO NOT
extend the dowels of the
Face Rest further than 3” from
the table portals to ensure a stable
connection.
CAUTION:
Excessive force, such as clients pushing on the Arm Rest Shelf to lift
themselves off the table, may damage the table and/or the Arm Rest Shelf
as well as being potentially hazardous to your client. This type of damage
to the equipment is NOT covered by your warranty.
