19
DIRECTIONS FOR USE
Grasp rod at 90º
bend and push into
table to unlock.
TO MOVE FOOTBOARD FROM 2” TO 4” POSITION
With second hand,
grasp footboard &
rotate 180º to down
position.
Grasp rod at 90º
bend and pull to 4”
position.
Check locking by
moving footboard
left and right.
With second hand,
grasp footboard
and rotate 180º to
up position
Grasp rod at 90º
bend and pull away
from table to lock
in position.
CAUTION
When the footboards are in
the down position, it is possible
for them to hit the ground in
low height or tilt conditions.
Operate the table with the
footboard up if possible. If not,
then check ground clearance
to prevent damage to the
footboards.
DIRECTIONS FOR USE
CAUTION
Make sure footboards are
securely positioned before
patient places weight on
them.
INTEGRATED FOOT BOARD (CONTINUED)
