background image

Installation Check List 

PF4000FH

System Operation - The user FULLY understands

YES

NO

How to operate the system with all control devices

How to isolate the power to the automation system

How to manually release the system in event of power failure

The safety rules and issues associated with your system

Safety devices on the system have been verified and checked

Safety devices and features suit the site/application for which it was designed

How to open the door on the equipment

Check the following items

YES

NO

Door keys have been handed over

Key switch keys have been handed over

All equipment and site has been left in a clean and safe state

Any warning signage has been fitted by Engineer/Client to make people aware

Any times and special programming instructions undertaken

Product works the way site need it to this includes “no passage time out” etc

System has had the completed conformity certificate

All items on the delivery note have been handed over to client/site - 

this should be signed for on the separate sheet which is titled “Delivery Note” (green/ or yellow paper) if parts missing call supplier

The engineer has expressed the importance of regularly maintaining the equipment

POWER ISOLATION - The power isolator for your automation system is located at:

.....................................................................................................................................................

The following denotes that the above has been completed to a satisfactory standard. The engineer has explained the system of 
operation to you and any devices that you have had fitted. If this is agreed and has been displayed please sign in the indicated 
fields below. All information will be passed on correctly to other system users. The users of the system will use this system 
correctly and safely. 

Engineers Name: ........................................................................      Engineers Signature: ...........................................

Clients Name: .............................................................................      Clients Signature: .................................................

16

Summary of Contents for PF4000FH





















Reviews: