13
3.1 GENERAL SAFETY
• The barrier is designed exclusively for vehicles traffic; report and delimit any walkways through a special sign.
•
Keep adults, children and property out of range of the automated system, especially while it is operating.
• For safety reasons and to comply with current standards, we recommend using the
CSB-BR
control unit.
• To install follow the instructions given in the enclosed “GENERAL INSTRUCTIONS FOR SAFETY” sheet.
• All electrical connections must be done in compliance with current laws.
• The installer must instruct the user on how to use the automatism correctly, on the manual emergency manoeuvre and on the possible risks during operation.
• Analyse the risks and take all the appropriate measures to eliminate them, as prescribed by the
EEC
machine directive
2006/42
, installing the safety devices.
• Always disconnect the electricity before attempting any work on the system with a lockable cut-off switch.
3.2 WARNINGS
Correct controller operation is only ensured when the data contained in the present manual are observed. The Company is not to be held
responsible for any damage resulting from failure to observe the installation standards and the instructions contained in the present manual.
The descriptions and illustrations contained in the present manual are not binding. The Company reserves the right to make any alterations
deemed appropriate for the technical, manufacturing and commercial improvement of the product, while leaving the essential product features
unchanged, at any time and without undertaking to update the present publication.
3.3 USE
• It is essential to follow the instructions given in the enclosed “GENERAL INSTRUCTIONS FOR SAFETY” sheet.
• In the case of a manual manoeuvre, follow the indications described in point
2.5
.
• Consult the
control unit’s installation and operating manual.
3.4 ROUTINE MAINTENANCE
(EVERY 6 MONTHS)
• La manutenzione deve essere eseguita solo da personale qualificato.
• Maintenance must be carried out by qualified personnel only.
• Check the condition of the barrier structure.
• Check tightness of the arm.
• Check the condition of the spring, chain and relative anchorings.
• Check arm balance.
• Check that at the end of travel the arm is horizontal and/or vertical
• Check operation of the emergency manoeuvre.
• Check operation of the control unit and safety devices.
EN
3. Use and maintenance
ENGLISH
