Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
- English -
3
2
- English -
Installation
Important:
● The unit can be placed within the pond (submerged) or outside of the pond (dry)
● Install the unit so that it is not exposed to direct sun radiation (max. 104 ºF - 40 ºC).
● Do not lift the pump by its power cord.
Submerged installation
!
Attention! Risk of damage
.
Ensure that the unit does not take in air or runs dry.
●
Only operate the unit with the filter housing.
●
For maximum water flow, it is recommended that the largest
tubing size for your pump is used.
○ If needed, cut the adapter using a hacksaw; consult
packaging for tubing size.
1.
Attach the adapter to the pump first, then connect tubing to
the adapter.
NOTE: Tubing is NOT INCLUDED.
2.
To adjust the water flow remove the filter housing and turn
the flow control to increase or decrease the flow.
○ Place the filter housing back onto the pump.
3.
Place the unit horizontally with its feet downward
1.
2.
3.
Dry installation
●
Operate the unit without the filter housing.
●
For maximum water flow, it is recommended that the largest
tubing size for your pump is used.
○ If needed, cut the adapters using a hacksaw; consult
packaging for tubing size.
1.
Remove the filter housing from the pump.
○ Attach the adapters to the pump first, then connect tubing to
the adapters.
NOTE: Tubing is NOT INCLUDED.
○ If only one adapter is being used, screw the cap onto the
second adapter
2.
To adjust the water flow turn the flow control to increase or
decrease the flow.
3.
Place the unit horizontally with its feet downward. To prevent
air from being taken in, ensure that unit and supply hose are
always below the water level.
!
Attention! Risk of damage
.
Ensure that the unit does not take in air or runs dry. Do not connect the unit to a water line.
1.
2.
3.
