- EN -
12
HeatControl
4.
Insert the power plug of the thermostat into
the mains socket and program the unit.
Programming the unit
1
Display
2
Plus button
3
Minus button
•
Ambient temperature:
When the power plug
is connected, the display will indicate the am-
bient temperature measured by the temper-
ature probe in degrees Celsius, e.g.
21.5
. The
display will flash and then stay continuously
lit.
•
Target temperature default setting:
A tem-
perature of 25 °C is set in the factory for the
heater to be connected.
•
Changing the target temperature:
When the
plus or minus button is pressed, the saved tar-
get temperature is displayed and increased or
Summary of Contents for HeatControl
