- EN -
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
17
4.1
Fitting the filter container
W A R N I N G
Electrical current may cause death or severe injuries.
►
Ensure that the unit is installed in a flood protected position at a distance of at least 6.6 ft (2 m) from
the water.
C A U T I O N
Due to the high weight of the unit, spinal injuries or crushing of limbs is possible when carrying the unit.
The unit weighs more than 55 lbs (25 kg). (
→
Technical data)
►
Use suitable lifting equipment (e.g. special load handles).
►
Have the aquarium and cabinet carried by several persons to spread the load and protect against
spinal injuries.
►
Protect limbs from crushing.
►
Do not transport the unit when it is filled.
The filter system operates day and night and causes rinsing noises during the automatic cleaning
cycles.
►
Please protect the general public and your neighbourhood from noise disturbance and comply with
the statutory noise regulations.
►
Enclose the filter system such that the enclosure effectively absorbs the noises.
►
Select the location of the filter system in order to avoid noise disturbance.
A, B
Plan the installation of the filter system. With careful planning, taking the ambient conditions into
account, you will obtain optimum operating results.
The following conditions must be met:
►
As the filter module is very heavy when filled, it must be placed on a suitable base (at least on slabs,
but preferably on a poured concrete base) to prevent it from subsiding.
►
Horizontally align the base slab.
– The filter system must be positioned horizontally (max. deviation ±0.2 in (±5 mm)).
– Tip: Use commercially available concrete slabs, each measuring 19.7
in
×
19.7
in
(500 × 500 mm). One concrete slab is required for the operation of the filter system on its own;
two concrete slabs are required for operation of the ProfiClear Compact/Classic pump chamber
module.
►
Plan sufficient space for carrying out cleaning and maintenance work.
►
Drain the dirty water into the sewer system or far enough away from the pond so that it cannot flow
back into the pond.
– If the coarse dirt and dirty water both run into the same pipe, it is important to use at least 4 in
(DN 110) pipes.
►
Position the inlet in the pond (e.g. via a stream or waterfall) so that it is lower than the outlet of the
filter system.
A water course or waterfall guarantees optimum water return to the pond. In this way, the filtered pond
water is enriched with oxygen before it is returned to the pond.
System specific requirements
►
Horizontally align the base slab.
►
Position the inlet in the pond (e.g. via a water course or waterfall) so that it is lower than the outlet of
the filter system.
Summary of Contents for ProfiClear Premium Compact-M EGC
