CX Chlorinator - Salt and Mineral Operation MANUAL
Page
4
of
33
2.
GENERAL OVERVIEW
Congratulations on your recent purchase of your Oasis CX Premium Salt & Mineral Chlorinator Please
take a moment to read through the entire manual before installing your new unit. Your chlorinator must
be installed and operated as specified.
While every effort has been made to ensure that the information contained in this guide is accurate and
complete, no liability can be accepted for any errors or omissions.
OASIS AQUATICS Pty Ltd
reserves
the right to change the specification of the hardware and software described herein at any time without
prior notice.
Please remember that your Oasis CX Premium Salt & Mineral Chlorinator is not designed to chemically
maintain your pool water and keep it balanced, but rather to produce chlorine from a mild salt solution
within the water. We encourage regular water testing, balancing and correction if & when required to
maintain the recommended balanced levels of your pool water. This is a vital part of a complete
maintenance program and will ensure trouble free performance as well as a healthy and sparkling clean
pool.
There is one design, comprising 6 different size models in our range:
The models available (CX15, 25, 25LS, 35, 45 and 55) are all reverse polarity units designed to
automatically change direction every 4-16hrs (depending on your setting). See 7.3 CELL CLEANING
to change the reversing times. This change of polarity causes the calcium to dislodge and keep the cell
plates clean. Please note occasional cleaning of the electrode plates may still be necessary.
Thank you again for choosing an Oasis CX Premium Salt & Mineral Chlorinator We wish you many
happy years of swimming in your crystal clear pool.
