background image

4

EN

    Operating and Maintenance

SERVICE AND MAINTENANCE

For your protection, always disconnect the 

service cord from the electrical outlet and remove 

the water receptor before starting service and/or 

maintenance.

1. 

Cleaning the cabinet: Wipe the exterior with 

a soft, damp cloth. Do not use solvents or 

cleaning agents. Dust may be removed with 

the brush attachment of a vacuum cleaner.

2. 

Cleaning the air filter: Remove air filter from 

rear of unit by pushing “arrow indicators” 

gently inwards, remove filter. Brush lightly or 

wash in warm sudsy water.

3. 

Cleaning the water receptor: Wash in warm 

sudsy water. Rinse and dry.

4. 

Storage: Thoroughly clean and dry the 

dehumidifier. Cover and store in a clean, dry 

area.

5. 

Service hint: To save yourself unnecessary 

expense, make the following checks before 

delivering  your  dehumidifier  to  a  service 

centre.

A. 

Insufficient  moisture  removal  -  little  or  no 

water collection.

1. 

Poor air circulation - See “Choosing a 

location” paragraph 2.

2. 

Room temperature and relative humidity 

–  See  “Operating  your  dehumidifier” 

paragraph 3.

B. 

Runs continuously.

1. 

Check humidistat control setting. Is it on 

“Max Dry”?

2. 

Are windows and doors closed?

3. 

Is area too large for the capacity of your 

unit?

C. 

Dehumidifier will not start.

1. 

Check control dial.

2. 

Check outlet. Plug a lamp or other 

appliance into outlet to make certain 

power is available.

3. 

Check fuse or circuit breaker.

4. 

If using an extension cord, make sure it is 

good by checking it with other appliances.

Replacement  of  the  power  cord  should 

ELECTRICAL INFORMATION

1. 

Available power supply must agree with that 

listed  on  the  dehumidifier  data  plate.  If  an 

extension cord is used at any time, it should 

be suitably rated, taking account of the rating 

as specified on the rear of the unit.

2. 

Never  operate  a  dehumidifier  in  an 

environment where it is likely that standing 

water will accumulate around the unit. If this 

condition should occur, FOR YOUR SAFETY, 

UNPLUG  THE  SERVICE  CORD  before 

stepping into the water accumulated around 

the dehumidifier.

3. 

DO NOT operate the dehumidifier if it is in a 

damaged condition.

4. 

If the supply cord is damaged, it must be 

replaced by the manufacturer or its service 

agent or a suitably qualified person in order 

to avoid a hazard.

only be carried out by properly trained 

and equipped personal, or return the 

Dehumidifier to the dealer. 

Reviews: