6
Getting Started
1. Open
the
MyGrid mobile app
that you downloaded when
you installed your GridPort.
2.
From the device list,
select
the
MyGrid Switch.
3. Follow
the
onscreen instructions
to install the MyGrid
Switch and pair it with your GridPort (for reference, the
instructions are also presented below).
Installing and Pairing the MyGrid Switch
1.
Plug the MyGrid Switch into the electrical wall outlet that
provides power to the appliance approved by your utility
(e.g., window air conditioner). Do not plug the appliance
into the MyGrid Switch yet.
2.
Press the Device Button for 5 seconds to initiate pairing
mode
When the HAN LED blinks Blue, the device is ready to pair
with your GridPort. The MyGrid Switch remains in pairing
mode for 15-minutes. Perform the next steps within this
time.
HAN LED blinks
Blue
Power LED turns
Green
