Fitting and Removing the Front Wheel
To fit the front wheel, slide the locating pin on the wheel into the hole on the front wheel
mount (fig.13).
Ensure the wheel has clicked into place before using the stroller (fig.14).
To remove the front wheel, depress the button at the back of the mould and slide the
wheel out. (fig.15).
fig. 13
fig. 19
fig. 14
fig. 20
fig. 15
fig. 21
Using the Front Swivel Wheel
To put the wheel in swivel mode, slide the lever to the strollers’ left (fig.16 & 17).
To lock the swivel wheel, slide the lever to the strollers’ right (fig.18).
fig. 16
fig. 17
fig. 18
Fitting and Removing the Back Wheels
Applying the Brakes
To fit the back wheels, slide the locating pin on the wheel into the hole on the rear wheel
mount (fig.19). Ensure the wheels have clicked into place before using the stroller
(fig.20).
To remove the back wheels push down on the ‘L’ shaped lever on the inside of the wheel
mount, then slide the wheel out (fig.21).
To lock the brakes fully, using your foot, push down on the brake lever (fig.22).
To release the brakes, using your foot, lift each brake lever (fig.23).
fig. 22
fig. 23
Lock
Lock
Release
Release
Press
Press
6
7
www.obaby.co.uk
www.obaby.co.uk
