2
APPLIANCE DESCRIPTION & OPERATION
BEFORE YOU MOUNT YOUR LIGHT:
1) Remove mounting bracket from back side of light. Open battery cover by taking out 2 thumb screws, see Fig. 1.
2) Insert 4 AA batteries (not included) according to correct polarity.
3) Close battery cover and fasten 2 thumb screws.
HOW TO USE:
After mounting the motion sensor light, it is ready to use.
The light automatically turns off after 15 seconds of no motion detected.
TECHNICAL DATA & MATERIAL
Name:
Motion Sensor Light
Model no.:
HO-2200
Item Weight:
120g (batteries are not included )
Product Dimensions: 10 x 8.3 x 3 cm/ 3.9 x 3.3 x 1 inches
Material: ABS
Batteries: 4 AA batteries (not included)
MOUNTING WITH TAPE (INDOOR ONLY):
1) Attached double-sided tape (included) to the back of mounting bracket, see Fig. 2.
2) Attach mounting bracket to wall. Attach the main unit to mounting bracket.
MOUNTING WITH SCREWS (FOR INDOOR OR OUTDOOR USE):
1) Drill 2 holes, diameter 0.6 to 0.7cm and depth 3 cm in the wall.
2) Put anchors into the holes and align the mounting bracket and fasten the screws.
3) Attach the main unit to the mounting bracket, Fig. 4.
Use only new alkaline or lithium AA batteries with 1.5V rating. Don’t mix
old and newbatteries. Install batteries with polarity in correct position
The light takes approximately 10 second to activate once batteries are
inserted.
The light only turn on when it is dark and only when motion is detected.
Battery Cover
Fig. 1
Double Sided Tape
Mounting Bracket (Back)
Fig. 2
Fig. 4
Mounting Bracket (Front)
Holes for screws
Fig. 3
Loop on the back
of the main unit
Hook
Technical specifications are subject to change without notice.
