2
Handle
Lock Brake
Brake Wire
Tightening Knob
8” Solid Caster
Padded Backrest
Padded Seat
Basket
Seat Supporting Bars
Folding Hinge
OVERVIEW
PROPER ROLLATOR HEIGHT
ASSEMBLY
Always make sure the rollator is at the proper height before use.
1. Stand upright on a firm and flat surface and let your arm hang down naturally and
comfortably on your side.
2. The handle of the rollator should be at the height of your wrist, and your elbow
should be flexed 20 to 30 degree when using the rollator.
3. Adjust the handles of the rollator till the handles are at the ideal height.
Setting Up the Rollator:
1. Remove all contents from the carton: backrest, handle with tube, rollator frame and basket.
2. Open the rollator frame and make sure the folding hinge is in fully open position.
3. Slide padded backrest into frame brackets making sure snap buttons protrude through holes.
4. Unscrew the tightening knob from handle and insert handle tube into frame at desired height.
Lining up holes appropriately and slide the bolts through holes from the inside and screw on tightening knob until
secure.
Installing the basket:
The basket can be installed under the seat, or at the front of the rollator:
1. Flip up the padded seat, and put the basket in between the seat supporting bars.
2. Use the hanger on the basket to hang at the front of rollator.
Hanger
