2
- Inspect the safety frame for wear and damage regularly.
- Use mild soap and water solution to clean the safety frame. Rinse with clean water and dry with soft cloth. Do not use
abrasive cleaners to any part of the product.
- Store in cool and dry place if not in use. Long exposure to direct sunlight and heat may damage the rubber accessories.
- Do not make attempts to repair the product.
- Please bring the product to the dealer or the service center.
- Be careful when handling the product in order to avoid damage to the equipment.
- Check regularly and stop using if damage is present.
SPECIFICATION
ASSEMBLY AND HOW TO USE
Please read all instructions below before installing the product.
1. Detach the toilet seat by removing the toilet seat bolts.
2. Place the frame mounting flange on the toilet and align the holes.
3. Place the toilet seat and align the holes, and use the bolts to secure both the toilet seat and the mounting flange.
4. Slide the side frames into the mounting flange, and secure them with the snap buttons. An audible ‘click’ will be heard
when the frame is locked.
5. Slide the leg extension into the side frames and set the height, the legs of the frame should be in contact with the floor.
6. Adjust the width with the adjustment holes on the mounting flange.
7. Make sure all snap buttons are secured before use.
Always test the stability of the safety frame before use.
Flange
Model No.:
MU-2010
Name:
Toilet Safety Frame
Material:
Aluminum
Size:
Fits most toilet seat
Weight Capacity:
115kg/ 250 lbs
CARE AND STORAGE INSTRUCTION
Technical specifications are subject to change without notice.
