5 |
P a g e
ObeDog Ultra / Ultra Dual
1. Antenna
– Transmits signal to the Receiver Collar(s)
2. Charging Port
3. LCD Display
4. Power Button
– Press and hold the button for 2-3 seconds to turn the Transmitter ON/OFF
5. Receiver Tone Button
– Press button to produce a tone in the Receiver for Sound Training. In Programming Mode, the
button is used to
LOWER
the Settings.
6. Static Shock Button
– Press button to deliver a Static Shock Stimulation to the receiver
7. Menu/Mode Button
– Press the button once to cycle between Receiver A, Receiver B or Both Receiver Mode. Press
and Hold the button for 3 seconds to enter Programming Menu.
8. Vibration Button
– Press button to deliver Vibration Stimulation to the Receiver Collar
9. Speaker
– Select between 4 modes (Vibration, Static Shock, Beep and Locate)
10. Transmitter Tone Button
– Press button to produce a tone in the Transmitter for Sound Training. In Programming
Mode, the button is used to RAISE the Settings
LCD Icons
A.
Receiver Tone Level: Indicates 3 Levels of Receiver Tone.
B.
Static Shock Level: Indicates 8 Levels of Static Shock.
C.
Battery Indicator: Indicates 3 Levels of Battery Status.
D.
Vibration Level: Indicates 8 Levels of Vibration.
E.
Transmitter Tone Level: Indicates 3 Levels of Transmitter Tone.
F.
A: Indicates Receiver 1 is being controlled; B: Indicates Receiver 2 is being controlled;
AB: Indicates Both Receivers are being controlled
Key
Definition
