16
6.
The surface guarantee does not apply to installations exposed to any type of chemical that
may cause corrosion, such as smoke and rainwater containing carbon, deposits or particles of
heavy metals, alkaline products such as ash, cement or animal excrements, or to installations
located in the vicinity of a sewage treatment plant.
7.
The visual appearance of the cutting edges and the discoloration of the zinc surface due to
water runoff from cutting edges or adjacent parts is not covered by the surface warranty.
8.
The warranty does not apply to areas with high zinc abrasion (desert areas, areas with sandy
soils and strong winds).
9.
The mounting system must be inspected annually by the customer or his vicarious agent. Any
damage detected must be repaired (scratches, dents, etc.) The entire system must be serviced
annually in accordance with Oberhauser's assembly instructions and the assembly and
maintenance instructions contained therein. The customer or his vicarious agent or his
representative is responsible for this.
10.
All our warranty services are subject to full payment of the purchase price by the customer.
They exist within the granted period from the day of building approval, but at the latest from
the day of final invoicing.
11.
These conditions are a complete part of the contract concluded between Oberhauser Bau-
Systeme GmbH and the customer.
6.
Safety and liability
6.1
Electrical installation
Our assembly instructions do not provide any electrical installation instructions, but are exclusively
dedicated to the assembly of the substructure and the modules for a PV system.
Therefore we do not assume any liability for damages caused by the electrical system.
However, you should observe the following instructions:
●
Installation and commissioning should be carried out by qualified electricians.
●
Observe valid regulations and safety instructions.
●
Do not carry out electrical installation in damp conditions.
●
Even low lighting can lead to very high DC voltages at the connection of solar
modules and can therefore be life-threatening if touched!
6.2
Safety at work
The valid accident prevention regulations should be observed and followed for all types of work.
In addition, only tested power tools should be used and the danger area should be cordoned off.
In order to avoid injuries, sufficient personal protective equipment such as safety shoes, appropriate
work clothing, work gloves, safety goggles, helmet, etc. must be used.
Information can also be obtained from the building trade association.
Summary of Contents for FRTSTV
