OBERHEIM GM 1000
Digital Signal Processor
- 81 -
1. INTRODUCTION
1.1 PRECAUTIONS
The following is a list of a number of simple precautions to be adopted when using and
maintaining the instrument in order to avoid damage to its mechanical and electronic
structures:
•
To avoid the risk of electric shock, never make the connections or use the instrument
with wet hands.
•
Never apply excessive force to the instrument's mechanical parts and keys.
•
Do not stress the instrument in transit or during use.
•
Do not place the instrument close to heat sources, in excessively damp or dusty places
or close to strong magnetic fields.
•
When possible, do not place the instrument close to units which generate strong
interference, such as radio and TV sets, monitors, etc.
•
Never insert foreign bodies or liquids of any kind inside the instrument, for any reason.
•
Never use solvents on the instrument's finishes. To clean, use only a soft cloth dipped
in water.
•
The inside of the instrument does not contain any parts requiring maintenance by the
user. Never attempt to carry out repairs or modifications to the instrument; always
contact qualified personnel for any repairs.
•
Only connect foot-switches with normally open contact. Prolonged use of unsuitable
pedal units causes serious damage to the instrument's electronic components.
•
Use the power supply lead supplied or an equivalent with earth. Never use the
instrument unless it is connected to an adequate earth connection. Before making the
connection, check that the mains voltage is as indicated on the body of the adaptor.
•
Disconnect the power supply lead from the mains socket if the instrument is to be out of
use for long periods.
Summary of Contents for GM-1000
Page 1: ...24 BIT DIGITAL SIGNAL PROCESSOR GM 1000 OPERATING MANUAL...
Page 82: ......
Page 84: ......
