OBERHEIM GM 1000
Digital Signal Processor
- 134 -
Regulates the attenuation frequency of the high tones in the early reflections.
Early Reflections Mix Level parameter. Range: 0 - 100
Regulates the quantity of early reflections in the effect.
Reverberation Eq Lo Shelve parameters.
Frequency Range: 50, 70, 100, 140, 200, 280, 400 Hz
Boost/Cut Range: +14db/-14dB
Reverberation Eq Mid Peak parameters.
Frequency Range: 100, 140, 200, 280, 400, 560, 800 1ko, 1k4, 2k0, 2k8, 4k0, 5k6, 8k0
Hz
Bandwidth (Q) Range: 0.5, 1, 2, 3
Boost/Cut Range: +14db/-14dB
Reverberation Eq Hi Shelve parameters.
Frequency range: 1k5, 2k1, 3k0, 4k2, 6k0, 8k5, 12k Hz.
Boost/Cut Range: +14db/-14dB
For this section, refer to the explanations supplied in the section on the parametric
equalizer. These controls act on equalization of the late reflections (reverberation).
GATE REVERB
A reverb effect generally used with percussive sounds. Its main feature is that the
background ambient effect is maintained at a given level for a certain period of time, after
which it is cut off sharply, without the normal dying away noticed in ordinary reverb
algorithms.
Type parameter. Range: Normal, LeftToRight, RightToLeft, Reverse.
The type parameter is used to select a conventional Gate, a Reverse Gate, or two effects
of Panning between the channels.
Rev Time parameter. Range: 50 - 500 ms
Controls the duration of the reverb.
Summary of Contents for GM-1000
Page 1: ...24 BIT DIGITAL SIGNAL PROCESSOR GM 1000 OPERATING MANUAL...
Page 82: ......
Page 84: ......
