OBERHEIM GM 1000
Digital Signal Processor
- 82 -
2. DESCRIPTION OF CONTROLS AND CONNECTORS
2.1 FRONT PANEL
1.
Phones Output: this socket is a headphones output which allows the GM 1000 to
be used even without connection to an amplification system.
2.
Phones Level: used to regulate the volume of the signal sent to the PHONES
OUTPUT.
3.
Input Level: LED indicator for the input signal level.
4.
Display: backlit display used to display various information, such as the number
and name of the memory to be used, the programming parameters, the sound
spectrum analysis data, etc.
5.
Value: data input device which can be used to vary the values selected using the
cursor keys. Turn clockwise to increase the selected value or anti-clockwise to
decrease.
6.
Guitar Input: dedicated input connector for a guitar.
7.
Input Level: regulates the amount of signal supplied as input to the GM 1000. The
setting applies to both the front and rear connectors.
8.
Midi message: light indicating that the rear Midi In connectors are receiving midi
messages.
9.
Lcd Contrast: regulates the contrast of the liquid crystal display (LCD).
10.
Function keys: keys which allow the user to carry out the main functions necessary
for use and programming of the GM 1000.
11.
Cursor: the four illuminated green keys allow the user to move the cursor around
the display in order to select a parameter for modification.
12.
Group keys: keys used for selecting the groups which make up the sound
processing chain.
13.
Tools keys: these keys allow access to the Bypass, tuner and spectrum analyzer
functions implemented in the GM 1000.
14.
Power key: key used for switching the instrument on and off.
6
7
8
1
2
4
10
11
12
13
14
5
9
3
Summary of Contents for GM-1000
Page 1: ...24 BIT DIGITAL SIGNAL PROCESSOR GM 1000 OPERATING MANUAL...
Page 82: ......
Page 84: ......
