The transposition is displayed in semitones.
O
indicates standard pitch.
To transpose up an octave, set the transpose value to
12.
To transpose
up two octaves, set the value to
24,
etc.
2
MIDI Echo
When MIDI echo is on, all MIDI IN data received by the Matrix-1000 is
sent back out the MIDI OUT port. In other words, MIDI
echo
makes the
MIDI OUT port act like a MIDI THAU port, but with the advantage that
you can switch it on and off without unplugging any cables.
•
Use the+ key to turn MIDI
echo
on and the - key to turn it off, or
press
Enter
to switch between on and off.
Use MIDI
echo
to layer sounds from several Matrix-1000s, or from a
Matrix-1000 and another synthesizer. For example, to layer three
Matrix-1 OOOs:
•
Connect the MIDI OUT (not THAU) of the first Matrix-1000 to the
MIDI IN of the second. Connect the MIDI OUT of the second to the
MIDI IN of the third.
•
Set your Master instrument and all the Matrix-1000s to MIDI channel
1, as described under
Channel.
On the first Matrix-1000, press
Select
until you reach
Ext. Funct.
Press 2 to choose the MIDI
echo
function. Press + to turn MIDI
echo
on. Now do the same on the second Matrix-1000. Since the
third Matrix-1000 is the last in line, you do not need to turn on its
MIDI
echo.
•
That's it! Now when you play a note on your Master instrument,
you'll hear all three M atrix-1 OOOs play.
Layer several different Matrix-1000 patches for orchestral effects. Or, set
each Matrix-1000 to a different
Fine Tune
value, and layer the same
patch to get super-fat pads and unisons.
Matrix-1000 Owner's Manual
25
Summary of Contents for Matrix-1000
Page 1: ...0 NER S MAN UAL scanned at www wolzow com...
Page 5: ...4 Matrix 1000 Owner s Manual...
Page 15: ...14 Matrix 1000 Owner s Manual...
Page 64: ...scanned at www wolzow com...
