20 Oscillators
Oberheim
Oscillators section
To explore the sound of the oscillators:
1. Press the
global
button
2. Use the select Bank/Scroll encoder to navigate to the basic program
command, then press the
write
switch to set the synth to the Basic
Program.
3. In the basic program, only Oscillator 1 is audible. Both oscillators are
set to generate sawtooth waves.
4. Hold down a note on the keyboard, and in the
oscillators
section press
the
pulse
switch to combine a pulse wave with the sawtooth wave.
5. Press the
saw
switch once to generate only a pulse wave (
saw
will be
off.) Note that when turning the
pulse
width
knob, it’s possible to make
the pulse width so narrow that the sound “disappears.” With both wave-
form switches off, the oscillator will generate a triangle waveform.
6. Turn up the level of Oscillator 2 in the Filter section by pressing the
osc
2
switch.
7. Experiment with setting each oscillator to a different waveshape.
8. Try tuning one oscillator to an interval such as a third, a fifth, or a sixth.
Summary of Contents for OB-X8
Page 1: ...USER S GUIDE www oberheim com ...
Page 8: ...viii Oberheim ...